End stops

Description With this switch it is easy to make a mechanical end stop. The switch has a normally close and open connection

Specifications

Brand:	123-3D	Dimensions:	10 x 20 x 6.5 mm
Contact configuration:	SPDT	Our item no:	DEL00000
Contact material:	-

€2.75

€2.24 Excl. 23% VAT

EU warehouse

Microswitch end stop with 1 metre cable

Zoom in

Description With this switch you can easily create a mechanical end stop. The switch is already equipped with a 1 metre soldered cable.

Specifications

Brand:	123-3D	Length:	1 m
Contact configuration:	SPDT	Our item no:	DEL00005
Contact material:	-

€4.00

€3.25 Excl. 23% VAT

In stock

Mechanical end stop v1.2

Zoom in

Description This mechanical end stop has the microswitch pre-mounted on the printed circuit board and features a 3-pin Molex header and a 3-pin Dupont header for easy attachment to your 3D printer or CNC machine. This end stop is also equipped with a blue LED that lights up when the microswitch is activated. The endstop is suitable for 3V and 5V control, which means that it can be used with various controller boards.

Specifications

Brand:	123-3D	Our item no:	DEL00009
Dimensions:	10 x 36.5 x 16 mm

€4.00

€3.25 Excl. 23% VAT

In stock

Mechanical end stop including cable

Zoom in

Description This mechanical end stop PCB can be used with 3V and 5V. The end stop is equipped with a 65cm long cable with a 3-pin dupont connector so that you can easily connect the end stop to your electronics board.

Specifications

Brand:	123-3D	Dimensions:	10 x 40 x 17 mm
Cable length:	65 cm	Our item no:	DAR00031
Colour:	red

€4.00

€3.25 Excl. 23% VAT

EU warehouse

Mechanical end stop including cable (3-pack)

Zoom in

Specifications

Brand:	123-3D	Dimensions:	10 x 40 x 17 mm
Cable length:	65 cm	Our item no:	DAR00023
Colour:	red

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€10.50 (coming soon)

€8.54 Excl. 23% VAT

Optical end stop

Zoom in

Description This fully assembled opto-endstop uses a Vishay light barrier as a detector. Compatible with the mechanical variants.

Specifications

Brand:	123-3D	Our item no:	DEL00002
Height:	15 mm	Width:	17.5 mm
Length :	42 mm

€7.75

€6.30 Excl. 23% VAT

In stock

Creality 3D end stop

Zoom in

Description This mechanical end stop is applicable to the Creality CR-10mini and CR-10s series

Specifications

Brand:

Creality 3D

Our item no:

DEL00008

€5.25

€4.27 Excl. 23% VAT

In stock

Creality 3D endstop (2-pack)

Zoom in

Description This mechanical end stop is applicable to the Creality CR-10 mini and CR-10s series

Specifications

Brand:

Creality 3D

Our item no:

DAR01019

€7.95

€6.46 Excl. 23% VAT

In stock

Duet3D IR probe

Zoom in

Description This Duet3D IR probe detects the height of the print bed with infrared light. How exactly does this work? The reflection from the print bed surface is captured by the IR sensor, so that the height can be determined (contactless).

The sensor is supplied with a loose connector and two mounting screws.

NOTE: The sensor does not work with all surfaces. Avoid shiny surfaces!

Specifications

Brand:	Duet3D	Operating volt logic:	3.5 - 25V
Dimensions:	24 x 18 mm	Our item no:	DUE00009

€35.50

€28.86 Excl. 23% VAT

EU warehouse

Creality 3D CR Touch Auto levelling kit

Zoom in

Description The Creality 3D CR Touch Auto levelling kit is a solution for automatically leveling your 3D printer. It performs multi-point detection on the bed and records the height of each detection point.

The CR Touch has a metal probe that reduces wear and significantly extends its life. It works with PEI, glass, metal, magnetic circuit boards, carborundum glass and other 3D printing platform materials.

It is easy to install and use. You just need to download firmware from Creality official website and copy it to TF/SD card. Insert the card directly into the card slot on the 3D printer. The program can be updated after power on.

The CR Touch only works on 3D printers with a 32-bit motherboard.

Specifications

Brand:	Creality 3D	Our item no:	DAR01045
Dimensions:	39.3 x 27 x 17.5 mm	Weight:	0.05 kg

€51.50

€41.87 Excl. 23% VAT

EU warehouse

Antclabs BLTouch Auto Bed Levelling Sensor v3.1

Zoom in

Description The BLTouch is a sensor for automatic bed levelling. The sensor works simply, smartly and accurately. The advantage of the sensor is that it retracts automatically after use so that it does not get in the way during 3D printing.

The BLTouch sensor works with almost any 3D printer and is suitable for various print bed surfaces such as metal, glass, wood and tape.

Specifications

Brand:	ANTCLABS	Our item no:	DAR00016
Cable length:	15 cm	Voltage VDC:	5 v/°c
Manual:	Download	Weight:	0.01 kg

€39.50

€32.11 Excl. 23% VAT

In stock

Antclabs BLTouch auto bed levelling sensor cable kit SM-XD, 1m

Zoom in

Description With the Antclabs BLTouch cable of 1 metre you can bridge a longer distance for mounting the BLTouch Auto Bed Leveling Sensor.

Specifications

Brand:	ANTCLABS	Our item no:	DAR00018
Length:	1 m

Length:

1 m

1.5 m

€5.75

€4.67 Excl. 23% VAT

In stock

Antclabs BLTouch auto bed levelling sensor cable kit SM-XD, 1.5m

Zoom in

Description With the 1.5 metre Antclabs BLTouch cable you can bridge a longer distance for mounting the BLTouch Auto Bed Leveling Sensor.

Specifications

Brand:	ANTCLABS	Our item no:	DAR00019
Length:	1.5 m

Length:

1 m

1.5 m

€6.75

€5.49 Excl. 23% VAT

In stock

M12 LJ12A3-4-Z/BX Inductive distance sensor, 4mm

Zoom in

Description Easily add an automatic bed level system to your 3D printer with this inductive distance sensor. The sensor triggers on metal objects and has a theoretical measuring distance of 4mm. The diameter of the sensor is 12mm.

The sensor operates on 6V-36V DC and is an NPN variant/NO. The sensor has an internal pull-up resistor which makes it necessary to add a series resistor to the signal connection.

Wire colours:
Brown: +V (12V)
Black: Output (to series resistor 10k)
Blue: 0V (gnd)

Specifications

Brand:	123-3D	Max current:	0.3 A
Diameter:	12 mm	Our item no:	DEL00006
Input voltage:	6-36V	Screwthread type:	M12

€9.25

€7.52 Excl. 23% VAT

In stock

M18 LJ18A3-8-Z/BY Inductive distance sensor, 8mm

Zoom in

Description Easily add an automatic bed level system to your 3D printer with this inductive distance sensor. The sensor triggers on metal objects and has a theoretical measuring distance of 8mm. The diameter of the sensor is 18mm.

The sensor operates on 6V - 36V DC and is a PNP variant/NO. The sensor has an internal pull-up resistor which makes it necessary to add a series resistor to the signal connection.

Wire colours:
Brown: +V (12V)
Black: Output (to voltage divider)
Blue: 0V (gnd)

Data sheet (PDF)

Specifications

Brand:	123-3D	Max current:	0.3 A
Diameter:	18 mm	Our item no:	DEL00004
Input voltage:	6-36V

€9.25

€7.52 Excl. 23% VAT

In stock

Hall-E Endstop

Zoom in

Description This Hall-E Endstop from 123-3D detects magnetic fields thanks to a sensor. The endstop includes a sensitive range potentiometer. It is also equipped with an LED light that indicates an end and stop status.

Specifications

Brand:	123-3D	Our item no:	DAR00125
Input voltage:	3.3V-5V

€20.50

€16.67 Excl. 23% VAT

EU warehouse

Miniature microswitch with pre-soldered wire, 1.5m

Zoom in

Description This miniature 123-3D microswitch is pre-soldered on a 1.5m wire. You use the switch as an end stop on the axes in your 3D printer. The cable does not have a connector. This allows you to cut it to the desired length yourself.

Specifications

Brand:	123-3D	Our item no:	DAR00127
Cable length:	150 cm

€5.25

€4.27 Excl. 23% VAT

EU warehouse

TCST2103 Opto end stop (through hole)

Zoom in

Description This TCST2103 Opto endstop is a transmissive sensor. It contains an infrared emitter and a phototransistor, which are placed opposite each other on the optical axis. The lead package blocks visible light. You use the TCST2103 to build your own opto endstop.

Properties

Function: photo interrupter
Maximum collector current: 100mA
Maximum collector transmit voltage: 70V
Maximum current throughput: 20%
Max forward current: 60mA
Maximum operating temperature: 85°C
Maximum power distribution: 250mW
Max reverse voltage: 6V
Minimum operating temperature: -55°C
Fixing: bore
Number of channels per chip: 1
Peak Wavelength: 950nm
Number of pins: 4

Specifications

Brand:	123-3D	Our item no:	DAR00143
Dimensions:	11.1 x 24.5 x 6.3 mm

€2.95

€2.40 Excl. 23% VAT

EU warehouse

Dyze | Horizon auto bed levelling sensor

Zoom in

Description A smart upgrade for your 3D printer is the Dyze | Horizon auto bed levelling sensor. This sensor uses a force measurement to turn your nozzle into an accurate and reactive probe. This way you can automatically level your bed and compensate for any unevenness. The sensor is also a collision detector that protects your nozzle and your bed from damage. The sensor is easy to install and use on any 3D printer with an interchangeable extruder or hotend. The sensor works with any type of printing surface and does not need to be recalibrated when changing nozzles or hotends. The Dyze | Horizon auto bed levelling sensor is an ideal solution for a better 3D printing experience with less hassle.

Specifications

Brand:	Dyze Design	Mounting hole:	M3
Input voltage:	3v-6v	Our item no:	DAR00982

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€107.50 (coming soon)

€87.40 Excl. 23% VAT

3-wire cable red / black / yellow with 1 connector, 1m

Zoom in

Description This 3-wire cable is very suitable for connecting endstops. The cable has a length of 1 metre and is fitted with a 3-pin female header on one side. The other side has an open end.

Specifications

Brand:	123-3D	Pin pitch:	2.54 mm
Length:	1 m	Our item no:	DDK00004
No of ways:	3

€2.25

€1.83 Excl. 23% VAT

In stock

GEEETECH A10 Series, A20 Series, A30 Series endstop module for hot end for A10T, A30T, A20T, A20, A30Pro printers

Zoom in

Description This is a replacement A10 Series, A20 Series, A30 Series endstop module for hot end. It is suitable for A10T, A30T, A20T, A20, A30Pro printers with a V4.1B mainboard.

Specifications

Brand:

Geeetech

Our item no:

DAR00667

€2.75

€2.24 Excl. 23% VAT

In stock

GEEETECH end stop kit for the Prusa i3 Pro B 3D Printer

Zoom in

Description Replace a defective end stop on your GEEETECH i3 Pro B printer with this set of 3 and you will immediately have spare end stops in stock.

Specifications

Brand:

Geeetech

Our item no:

DAR00684

€10.50

€8.54 Excl. 23% VAT

EU warehouse

Creality 3D Ender-3 S1 (Pro) Y-axis endstop

Zoom in

Description This Creality 3D Y-axis End Stop can be used on the following models of Creality printers: Ender-3 S1 and the Ender-3 S1 Plus.

Specifications

Brand:

Creality 3D

Our item no:

DAR01050

€7.50

€6.10 Excl. 23% VAT

EU warehouse

Creality 3D X-axis Endstop

Zoom in

Description Creality 3D X-axis endstop.

Specifications

Brand:

Creality 3D

Our item no:

DAR01051

€7.50

€6.10 Excl. 23% VAT

EU warehouse

Creality 3D Ender-3 V3 SE/KE Y-axis end stop

Zoom in

Description This Y-axis end stop has a PCBA module and can be used on the Ender-3 V3 SE and KE 3D printer from Creality 3D.

Specifications

Brand:	Creality 3D	Our item no:	DAR01250
Colour:	black

€5.50

€4.47 Excl. 23% VAT

EU warehouse

Creality 3D Halot Mage (Pro and S) Z Limit Switch

Zoom in

Description This Creality 3D Halot-Mage (pro) Z Limit Switch is an original replacement part for your 3D printer. The switch is a PCBA module. In addition, it is a photoelectric opto switch module (B). This product is suitable for the Halot-Mage Pro, Halot-Mage and Halot-Mage S 3D printer from Creality 3D.

Specifications

Brand:	Creality 3D	Weight:	0.001 kg
Our item no:	DAR01412

€8.95

€7.28 Excl. 23% VAT

EU warehouse

Flashforge Creator 3 Pro levelling sensor

Zoom in

Description This Flashforge levelling sensor for the Creator 3 Pro is an original replacement part from Flashforge. The sensor helps you level your print bed, so you can make perfect prints.

Specifications

Brand:

Flashforge

Our item no:

DAR01453

€28.50

€23.17 Excl. 23% VAT

EU warehouse

Elegoo Neptune 4 (Pro, Plus & Max) Proximity Switch (Levelling Sensor)

Zoom in

Description The Elegoo Neptune 4 Series Proximity Switch is an original inductive auto-bed levelling sensor designed for the Neptune 4, 4 Pro, 4 Plus, and 4 Max. This contactless sensor detects the metal bed during homing, for accurate levelling and reliable prints.

Specifications

Brand:

Elegoo

Our item no:

DAR01520

€12.50

€10.16 Excl. 23% VAT

In stock

Elegoo Saturn 3 Ultra & Jupiter SE end stop

Zoom in

Description The original end stop for both the Elegoo Saturn 3 Ultra and the Jupiter SE. This switch detects the end point of the Z-axis during homing and prevents damage to the build plate or LCD during the "return to zero."

Specifications

Brand:

Elegoo

Our item no:

DAR01551

€3.50

€2.85 Excl. 23% VAT

EU warehouse

Creality 3D Ender 3 V3 X/Z Limit switch

Zoom in

Description The Creality Ender-3 V3 X/Z Limit Switch is an essential replacement part that ensures precise positioning of your 3D printer’s X and Z axes. This mechanical limit switch prevents the print head or bed from moving outside the allowable range, which is crucial for consistent and reliable print results. Specifically designed for the Ender-3 V3 and V3 Plus models, this switch offers easy installation and long-lasting performance.

Key Features:

High precision: Ensures precise homing and positioning of the X and Z axes.
Durable Design: Made of high-quality materials for long-lasting use.
Easy Installation: Plug-and-play design with 3-pin connector for quick replacement.

Specifications

Brand:

Creality 3D

Our item no:

DAR01560

€5.50

€4.47 Excl. 23% VAT

EU warehouse

Creality 3D Ender-3 S1 (Plus/Pro) X-axis_Limit Switch

Zoom in

Description This X-axis limit switch is an X-CRI-4111 PCBA module that works at 1V. The product is suitable for Creality Ender-3 V2 Neo, Ender-3 S1 Plus, Ender-3 S1 and Ender-3 S1 Pro 3D printers.

Specifications

Brand:

Creality 3D

Our item no:

DAR01586

€5.50

€4.47 Excl. 23% VAT

EU warehouse

Flashforge Adventure 3 spare Y-axis sensor board

Zoom in

Description The Flashforge Adventurer 3 Y-axis end-stop sensor is an essential replacement part for the Flashforge Adventurer 3 3D printer. This sensor detects the end position of the Y-axis, which is crucial for accurate and reliable prints. Replacing a faulty sensor can prevent printing problems and extend the life of your printer.

Key features:

Compatibility:Specifically designed for the Flashforge Adventurer 3.
Function: Detects the end position of the Y-axis to ensure precise positioning of the print bed.
Reliability: Ensures stable and consistent operation of the Y-axis.

Specifications

Brand:

Flashforge

Our item no:

DRO00114

€3.95

€3.21 Excl. 23% VAT

EU warehouse

Anet ET4 (Pro) levelling sensor

Zoom in

Description Simply add this automatic bed level sensor from Anet to your 3D printer. The sensor triggers on metal objects and has a theoretical measuring distance of 5mm - 10mm.

Specifications